1.进入标准安装目录cd /opt2.国内镜像下载安装包sudo wget https://resource.fit2cloud.com/jumpserver/installer/releases/download/v4.10.16/jumpserver-installer-v4.10.16.tar.gz3.解压安装包sudo tar -xf jumpserver-installer-v4.10.16.tar.gz4.必须进入对应目录否则脚本无法执行cd jumpserver-installer-v4.10.165.一键安装全程默认回车即可sudo ./jmsctl.sh install注下载很慢的话就退出更换为华为云镜像源vim /opt/jumpserver/config/config.txt把注释去掉即可放开这一行改完后执行命令./jmsctl.sh install6.关键配置修改8080端口同步DOMAINS6.1停止现有堡垒机服务sudo ./jmsctl.sh stop6.2修改堡垒机核心配置文件# 端口按照实际填写 sed -i s/^HTTP_PORT.*/HTTP_PORT83/ /opt/jumpserver/config/config.txt sed -i s/^SSH_PORT.*/SSH_PORT2223/ /opt/jumpserver/config/config.txt sed -i s/^DOMAINS.*/DOMAINS10.0.1.106:83/ /opt/jumpserver/config/config.txt # 确认改成功 grep -E ^(HTTP_PORT|SSH_PORT|DOMAINS) /opt/jumpserver/config/config.txt输出如下7.重启服务让配置生效sudo ./jmsctl.sh restart8.日常运维全套命令sudo ./jmsctl.sh start # 启动堡垒机服务 sudo ./jmsctl.sh stop # 停止堡垒机服务 sudo ./jmsctl.sh restart # 修改配置后必须重启 sudo ./jmsctl.sh status # 查看所有容器运行状态 sudo ./jmsctl.sh logs # 查看运行日志排查报错9.后台访问信息访问地址http://10.0.1.107:80自行替换为个人本机IP登录账号admin登录密码ChangeMe登陆后可自行修改密码1.1登入后创建用户组及用户